DIY Pauls marble cleaning
It is important that the cleaning solution used on marble be pH neutral. Do not use acidic cleaners on your marble or it will scratch and lose shine.
What do you use to clean marble
Use a natural, light soap or marble cleaner for deeper cleaning. If dust or other debris has accumulated a bit on your countertop or floor, dilute a gentle dish soap in a little warm water and use a soft cloth to clean your marble surfaces. Never use vinegar on marble.How do I make marble shine?
- Wipe the marble top with a soft, dry cloth to remove any surface dirt and debris.
- Wet a non-abrasive sponge with warm water, wring it out and wipe the marble top again.
- Spray the marble surface with commercial stone cleaner and wipe it off with a clean, soft rag. …
- Dry the marble top with a chamois cloth.
Warning
Never clean marble with ammonia or an acidic cleaner such as vinegar.
How do I clean marble bathroom floor?
- Wipe up water with paper towel or a clean cloth. For acidic liquid spills on the tile, wipe it up and then clean the air with a cloth dampened with water and dish soap.
- If you have marble in your bathroom, remember to dry the tile after every shower and bath.
Marble floor cleaning tip 4
- Dilute dish soap with warm water. Cleansers that are too acidic can actually damage marble tile, which means you shouldn’t use products with lemon, vinegar, or bleach on it. That’s why a gentle, non-abrasive dish soap, which has a neutral pH, is the best option for cleaning marble.
For the best results:
-
-
- mix approximately 8 ounces of warm water with one tablespoon of the soap in a spray bottle or other container. Shake the mixture well, to mix two ingredients.[1]
-
-
- Don’t use all-purpose cleanser on your tile unless it’s specifically marked as safe for marble. Apply solution to the marble. If you’re using the dish soap and water solution to clean marble tile on counter tops, you can apply it directly from the spray bottle. For floors, use a soft mop to apply to the tile.
Make sure not to apply too much solution to the marble, the tile surface should be damp, and there shouldn’t any pools of liquid. - If there is any standing water on your marble tile, wipe it up as quickly as possible. Wipe off tile and thoroughly dry. After you’ve applied the soap and water solution to your marble tile, you need to wipe down the surface to remove any dirt and debris. Use hot wet cloth to wipe down tile on your counter tops and mop dampened with hot water for your floors. Next, take a soft, dry towel or mop to thoroughly dry and buff the tile. Make sure the cloth or mop that you’re using to wipe off the soap isn’t too wet. Wring the material out carefully to prevent too much water from sitting on the marble surface.
- Use a dust mop. If you have marble tile on your floor, you may sometimes need to remove dust, dirt, and other debris, such as crumbs or loose tile. While a vacuum may be the easiest way to clean up this type of mess, you’re better off using a dust mop to clean the tile. Vacuum cleaners with worn wheels and metal attachments can easily scratch the tile surface.
For using a vacuum on marble tile make sure the wheels are not scuffed or rough in any spots. Don’t use metal attachments either.